Mesin Industri dan alat uji

5Ton-day (24 hours working) tissue Paper making line 2

   1.1.6 Guide felt roller:

             Size：φ219×2250mm

   1.1.7 Stand device of cylinder mould and couch roller

            Qty：1set

   1.1.8 Square cone pipe device

             Material is stainless steel 304, small end equips with reflux mouth. Quantity of reflux is 10% of the inlet pulp.  

             Square cone pipe and box body is connected with hinge. Activity bolt is fixed. The bottom of square cone pipe

             is in folded shape structure.

   1.1.9 Arc plate and adjusting device

             Arc plate and adjusting device includes upper lip plate coarse adjustment device and trimming device, it can

             make the upper lip plate overall upward or downward movement, regulate the lip plate overall opening, in

             order to achieve the requirements of manufacturing paper.

2. Touch roller pressure device: it is equipped with 1 set of touch roller pressure device.

    Size                    : φ450mm×2250mm

    QTY                    : 1 set

    Explain              : the roller body is made of cast iron. It is covered with rubber, rubber hardness is  "95°±2;

3. Dryer part:

    It consist of 1 pc of Φ2500mm dryer can, it equipped with pneumatic scraper, breath type exhaust hood.

    3.1 Dryer can

                 Size                                : ɸ2500mm×2250mm

                 QTY                                : 1set

                 Material of dryer             : HT250

                 Hardness                        : HB200-220

                 Roughness of dryer        : ≤0.8micron

                 Working pressure           : 0.3Mpa

                 Explain                            : The dryer can is casted with HT250, surface grinding, roughness is 0.8μm.Operation side and transmission part is casted with HT250. It is equipped with elliptic type manhole on end cap of operation side. It has obvious calibration internal manhole position in the insulation cover, Just open half surface cover can easily repaired. The plughole bolts should be clearly marked on operation side.

    3.2                      The stand of dryer can part：

                                Stand column, beam and stand are square frame

    3.3                      Steam condensate joint and siphon

                                QTY: 1pc

    3.4                      Guide felt roller

                                Size        :φ219×2350mm

                                Explain : all guide roller is made of seamless steel pipe, wall thickness is 14mm, it is chromed. The the of chroming is 0.05mm.