1. Cleaned barrels move 180 degree along with conveying chain wheel and to turn over frame. And then barrels are pushed into filling machine by barrel pushing cylinder and located on conveyor belt and wait for filling.
2. Sterilized empty barrels to filling position are located by location cylinder, and the filling position are located by location cylinder, and then filling pump for filling. Filling time set by PLC. It can correct filling time up to optimum condition by multifunction button on panel according to height of liquid level.
Capping process:
After finished filling, the full barrel transports into cap gland position in transiting loading cap by loading cap position after finish capping, barrel is took out by conveying chain.
Main technical parameter: |
|
Working station number |
Four columns and eight lines |
Washing nozzles |
Move up and down and enter into bottle about 100mm, have eight steps of washing processes |
Applied barrel |
Φ276x490xΦ56mm |
Filling heads |
4 head |
Capping mode |
Chain |
Capacity |
600BPH |
Total power |
6.5Kw |
Air source pressure |
0.45 – 0.6MPa |
Air consumption |
0.25L/Min (user supply) |
SALES OFFICE ADDRESS
Kawasan Perkantoran Metro Indah Mall blok D-35
Jalan Soekarno Hatta Bypass Area
BANDUNG City - JAWA BARAT Province – INDONESIA
PHONE
OFFICE : 022.7536349 (HOTLINE)
SALES : 0852.22.110091 / 0852.77.110091
E-PROC / PENGADAAN : 0852.11222.091
TECHNICAL / OPERATIONAL : 0852.118000.91
PROCUREMENT (PENGADAAN) :
eproc@valtekindo.co.id
CUSTOMER SERVICE & AFTER SALE SERVICE :
cs@valtekindo.co.id
SALES & TECHNICAL DEPARTMENT :
sales@valtekindo.co.id