Single Screw Palletizing Machine
I. Main motor
1. AC motor
2. Power : 37 KW
3. Imported TECO variable frequency converter
II. Screw
1. Diameter : ¢110, L/D: 12:1
2. Material is 38CrMoALA nit riding treatment, nit riding HRC65-70, Deep0.6-0.75mm, brittleness less than 11 grade. Hard chromium plated on the surface of the screw
III. Barrel
1. 38CrMoALA nit riding treatment, nit riding HRC65-70, Deep0.6-0.75mm, brittleness less than 11 grade.
2. Screw adopt with water cooling system.
IV. Circulating water cooling system
1. Cooling water pump power: 0.55kw
2. Soft water tube separated from the machine body, easy to clean and repair.
3. Water control use Taiwan Qiansi automatic solenoid pilot actuated valve
4. Materials of water tank, water pump, water cooling tube are all stainless.
V. Heating section: use quality cast aluminum heater
Four sections temperature control:
Control section Barrel stage heating type
First section First stage cast aluminum
Second section First stage cast aluminum
Third section First stage cast aluminum
Fourth section Machine head copper aluminum
Use the
thermocouple specially tests the melt material temperature;
Use the pressure sensor specially tests the melt material pressure.
VI. Hydraulic plate type automatic net exchange: Duplex place, two perforated plates, one, hydraulic station; or manual quick open net exchange for choice.
VII. Die face hot cutting machine head: Within the flow is smooth, homogeneous discharge
VIII. Interlock control system:
1. Temperature control system for the main machine utilizes Omron intelligent meter instrument, dual-channel, PLD parameters self-set and heater circuit breaking indication functions.
2. Host interlocking protection function: Single screw extruder and gear box oil pump interlock.
3. Single screw and feeder interlock protection, when feeder incurs failure, host will delay shutdown, in turn, the host incurs failure, the feeder will stop immediately.
4. Machine head equip with melt pressure and melt temperature indicator, and the melt pressure interlock with the host (main machine), achieving over pressure protection.
IX. Electric control system
IX.The electric control panel includes temperature control system, driving system, interlock joint control system.
SALES OFFICE ADDRESS
Kawasan Perkantoran Metro Indah Mall blok D-35
Jalan Soekarno Hatta Bypass Area
BANDUNG City - JAWA BARAT Province – INDONESIA
PHONE
OFFICE : 022.7536349 (HOTLINE)
SALES : 0852.22.110091 / 0852.77.110091
E-PROC / PENGADAAN : 0852.11222.091
TECHNICAL / OPERATIONAL : 0852.118000.91
PROCUREMENT (PENGADAAN) :
eproc@valtekindo.co.id
CUSTOMER SERVICE & AFTER SALE SERVICE :
cs@valtekindo.co.id
SALES & TECHNICAL DEPARTMENT :
sales@valtekindo.co.id