Mesin Industri dan alat uji

HLT.CLT

Hot Liquor Tank

Used to heat and store water for use in the brewing process;

Standard Features           :

1.Side or top manway

2.Sight gauge glass with guard and calibration (volume) strip

3.Sight gauge glass fittings with sample valve on bottom fitting

4.CIP sprayball and downtube

5.Heat exchanger water recovery inlet

6.Hot liquor outlet w/stainless steel butterflt valve

7.Water inlet fitting

8.Vent port

9.Over-flow tube routed under tank

10.Thermowell with strain relief

11.Coned top and bottom

12.Stainless steel legs w/ height adjusters & pads

13.2” PU foam insulation

14.Clad in stainless steel;

Method of Heating         :

1.Electric        : Use electric heater to heat the medium in the jacket to let tanks heated at bottom;

2.Steam          : Steam heat transfer panels (one on side, one on bottom) with inlet/outlet fittings;

3.Gas               : Forced draft gas burner with low water level cut-out and optional burner modulation

Cold Liquor Tank

Used for cool water for use in the wort heat exchanger.

Standard Features           :

1.Side or top manway

2.Sight tube with calibration strip

3.CIP sprayball and downtube

4.Outlet w/ stainless steel butterfly valve

5.Water inlet fitting

6.Over-flow tube routed under tank

7.Dimple plate glycol cooling jacket

8.Thermowell with strain relief

9.Coned to and bottom

10.Stainless steel legs w/height adjusters & pads

11.2” insulation

12.Clad in stainless steel;