CIP CLEANING SYSTEM
CIP Cleaning Tanks
Operational Process :
To makie acid or alkali liquid, it is better to pour pure water into the tank and then add acid and alkali the tank To heat the acid liquid, open the steam valve in the tank.
When it is heated to the required temperature and then close the valve to stop heating.
To do the cleaning process, open the outlet valve of acid ank, acid inlet valve in the cleaned tank and some relative valves in the pipes to be ready to liquid pass, outlet valve in the cleaned tank to flow back the liquid into acid tank.
Open the centrifugal pump and cleaning will start. When scheduled time is over, the pump will be closed and relative valves will also be closed. The acid cleaning process will stop.
Alkali cleaning process and pure water cleaning is the same as the acid cleaning.
Note that when it is liquid inletting and outletting, please make sure the respirator inhaling and exhaling state. If inhale and exhale is not smooth, you should do the repair first in case that the tank will be demaged when it is under higher pressure or vacuum atmosphere.
When the process is over, close all valves and pure out the used acid and alkali liquid or store into a storage tank for use again.
Care and Maintenance :
1. Maintain the driving device according to the manual
2. Clean the acid storage tank and alkali storage tank regularly to avoid corroded
3. After using the centrifugal pump a few time, should clean it timed to avoid jamming impeller
4. Checking and tightening the connecting parts of pipes and fittings regularly.
SALES OFFICE ADDRESS
Kawasan Perkantoran Metro Indah Mall blok D-35
Soekarno Hatta Bypass Area
BANDUNG City - JAWA BARAT Province – INDONESIA
OFFICE : 022.7536349 (HOTLINE)
SALES : 0852.22.110091 / 0852.77.110091
E-PROC / PENGADAAN : 0852.11222.091
TECHNICAL / OPERATIONAL : 0852.118000.91
PROCUREMENT (PENGADAAN) :
CUSTOMER SERVICE & INQUIRY :
SALES DEPARTMENT :
ADM & DOCS. DEPT :