Standard Accessories :
Parts With Machine
Reed: 1Pc
Cutter Blade: 1Pc
Temple : 1Pcs
Selvedge Bobbins: 1Pcs
Weft Density Gear: 1Set(6Pcs)
Selvedge Cutter Blade R&L Each: 1Set
Tape Wheels: 2Pcs
Heald Wire: 10000Pcs
Dropper: 10000Pcs
Beam: 2Pcs
Gripper and Gripper Tape: 2Sets
Small Feeder: 6Pcs
Additional Parts With Free Charge
Gripper and Gripper Tape:1Set
Base Plate: 1Pc
Rapier Base: 1Pc
Gripper Opener: 4Pcs
Cutter Blade: 2Pcs
Selvedge Cutter Blade R&L Each: 2Sets
Selvedge Bobbins: 2Pcs
Leno Device: 2Sets
Color Selector Finger: 8Pcs
Tape Wheel: 2Pcs
Crank Bush: 2Pcs
Nylon Drive Half Gear: 2Pcs
Let Off Worm Wheel: 2Pcs
Take Up Double Worm: 2Pcs
Base Plate Fixing Bracket: 2Pcs
Application:
The rapier loom is used to weave fabric with crude fibers (cotton, wool, hemp), chemical fiber and blending yarn etc. It is better for weaving thick fabrics than YJ747 loom.
Features:
With stronger frames and improvement of the beating-up and weft insertion devices on YJ747, the speed of YJ736 loom is higher and it can weave thicker fabrics than YJ747. The details of special features as following:
1. Adopt the four-links short crank, shorten and strengthen the lay swords, that get the loom to produce stronger strength when it beating up and the speed is higher.
2. The new six-links weft insertion system replaces the old four-links weft insertion system, that assures the rapiers have enough time to finish weft transfer inserting and get handover to be stable.
|
Reed Width |
180 cm |
|
Speed |
260-190 R.P.M |
|
Yarn Range |
Cotton 6 Ne~80Ne, wool 10Nm~135Nm, chemical fiber 900D~70D |
|
Shedding |
Upper mechanical (electronic) dobby, spring reversing motion, 20 or 24 shafts |
|
Weft Insertion Form |
Six linkages weft insertion |
|
Beating-up Motion |
Four linkages short crank arm beating-up |
|
Let-off Motion |
Adopting friction type let-off |
|
Take-up and Rolling-up |
Continuous take-up and separate rolling-up, full rolling diameter 400mm |
|
Weft Selection |
4~6 colors |
|
Diameter Of Warp Beam |
?600mm |
|
Warp Stop |
6 rows electric warp stop |
|
Weft Stop |
Piezoelectric ceramic sensor control weft stop |
|
Electric System |
PLC |
|
Power |
1.8~2.2 kW |
|
Weight |
2200~2500KG |
|
Overall Size |
3700 x 2000 x 1800 mm(“200cm/78)” |
SALES OFFICE ADDRESS
Kawasan Perkantoran Metro Indah Mall blok D-35
Jalan Soekarno Hatta Bypass Area
BANDUNG City - JAWA BARAT Province – INDONESIA
PHONE
OFFICE : 022.7536349 (HOTLINE)
SALES : 0852.22.110091 / 0852.77.110091
E-PROC / PENGADAAN : 0852.11222.091
TECHNICAL / OPERATIONAL : 0852.118000.91
PROCUREMENT (PENGADAAN) :
eproc@valtekindo.co.id
CUSTOMER SERVICE & AFTER SALE SERVICE :
cs@valtekindo.co.id
SALES & TECHNICAL DEPARTMENT :
sales@valtekindo.co.id
