Harga mesin, jual mesin, distributor mesin, cari mesin, Alat Uji Lab, Plastik, karet, Daur Ulang, kertas, Pertanian, Perikanan, Leather, Printing, Tekstil, Latex
Harga mesin, jual mesin, distributor mesin, cari mesin, Alat Uji Lab, Plastik, karet, Daur Ulang, kertas, Pertanian, Perikanan, Leather, Printing, Tekstil, Latex
WhatsApp
085222110091
WhatsApp
085277110091
  • Distributor Mesin Industri dan Alat Uji Laboratorium

ONE-STOP SOLUTION FOR YOUR INDUSTRY and LABORATORIES

Harga mesin, jual mesin, distributor mesin, cari mesin, Alat Uji Lab, Plastik, karet, Daur Ulang, kertas, Pertanian, Perikanan, Leather, Printing, Tekstil, Latex Jaw Crusher High Quality

Jaw Crusher High Quality

Hydraulic JC  :

1. The motor is directly installed on the host.

2. Replace the rigid anchor bolt with elastic limit block and rubber damping device.

3. The basic design is simple and it will make Installation time and cost are reduced by approximately 50%.

4. The installation space is small, it will make Infrastructure investment cost is reduced by about 30% than usual jaw crusher.

 

Lean Design for Higher Quality Only

This kind of jaw crusher series boasts more reasonable moment of inertia and greater crushing strokes through optimization of the equipment structure, crushing cavity and movable jaw's motion trail and speed. It is able to achieve higher crushing efficiency at the same power consumption and thus offer customers a larger rate of return on investment.

 

High Quality Casting

In order to ensure stable and efficient production during crushing hard materials, Hydraulic JC series of jaw crusher is equipped with such core rotating components as high-quality casting movable jaw body, large-eccentric heavy-duty forged eccentric shaft, cast flywheel with a high moment of inertia and high-strength integrated cast steel bearing box, as well as strong power with reasonable speed configurations.

 

International Top Configurations

High-quality raw materials and reliable design can provide sufficient equipment strength and remarkable durability of this H-HC series jaw crusher during super-hard material crushing and thus reduce the maintenance costs. According to users' requirements, well-known brand accessories at home and abroad are chosen such as bearings and motors, meeting users' demand for different configurations.

 

Easy Maintenance

The H-JC jaw crusher adopts centralized grease lubrication. Manual or automatic grease lubrication system can be configured as needed, which can reduce the difficulty in maintenance and simultaneously guarantee cleanness and neatness at the work site. The H-JC series jaw crusher uses a double-wedge regulating discharge port with the mechanical or hydraulic regulation available as needed, so it can be regulated more simply and efficiently than the traditional under boarding discharge ports.

 

Fast Installation, Quick Production

The H-JC series jaw crusher adopts an integrated motor base with it fixed directly on the jaw crusher. So the H-JC jaw crusher doesn't need to build base fabrication in advance. The installation space is reduced and more stable power transmission is achieved simultaneously. Elastic stop blocks and rubber shock absorbers are used to replace the rigid anchors, able to absorb the vibration peak load, reduce the mutual impact between the crusher and the foundation, and thus improve the service life of the jaw crusher.

 

An Apron Feeder is mainly consists of driving device, chain plate, tension device, transmission main shaft device, frame, carrier roller and supporting roller, etc.

Usually it runs at low speeds and at a controlled feed rate as it absorbs the impact loads of the material falling from a dump truck or a front-end loader and is ideal for withdrawing material from under a stockpile or from under a Primary Crusher.

Apron Feeders are of rugged, heavy duty construction and designed to handle large feed sizes and where no fines removal is required or where fines are removed by a separate Grizzly Scalper. Our heavy duty and robust apron feeders are engineered and built with an intense commitment to quality and attention to detail, providing maximum uptime and many years of service life. Because of their durable, long life components, our apron feeders are low maintenance even under severe conditions.

 

FRAME

Rugged welded construction frame to provide rigid support for intense loading conditions. Full length beams manufactured from rolled steel joists form the top and bottom members of this one piece unit. Cross members tie the framework together for maximum strength. Bolted onto these cross members are the universal beams which carry the impact rails and the carrier rolls For ease of removing the carrier rolls, the outside carrier roll channels are sectionalized and bolted to the cross beams.

 

Apron Feeder model: 1500×6000

Size (WxL)

1500×6000mm

Power

37KW

Max. feeding size

700

Feeding width

1426mm

Speed

?0.187 m/s

Chain

T203MC

Capacity

600tph

Installation angle

10°

 

Pesan Sekarang
Order lewat Whatsapp
Produk Terkait
CONTACT US

SALES OFFICE ADDRESS
Kawasan Perkantoran Metro Indah Mall blok D-35
Jalan Soekarno Hatta Bypass Area
BANDUNG City - JAWA BARAT Province – INDONESIA
 
PHONE
OFFICE : 022.7536349 (HOTLINE)
SALES : 0852.22.110091 / 0852.77.110091
E-PROC / PENGADAAN : 0852.11222.091
TECHNICAL / OPERATIONAL : 0852.118000.91

 

PROCUREMENT (PENGADAAN) :
[email protected]
 

CUSTOMER SERVICE & AFTER SALE SERVICE :
[email protected]
 

SALES & TECHNICAL DEPARTMENT :
[email protected]
 


 

©2020 PT.VALTEKINDO GLOBAL INTERTEK All right reserved   Developed by javwebnet